After preparation, the wood is peeled by a blade starting from the outside of the log and working toward the center, thus creating a wood veneer.
This process involves treating the wood by boiling the log in water. Oak herringbone parquet floor with two-strip wenge border Other wood manufacturing styles Rotary-peel Solid wood floors are mostly manufactured 0.75 inches (19 mm) thick with a tongue-and-groove for installation. Many solid woods come with grooves cut into the back of the wood that run the length of each plank, often called 'absorption strips,' that are intended to reduce cupping. The moisture content at time of manufacturing is carefully controlled to ensure the product does not warp during transport and storage.Ī number of proprietary features for solid wood floors are available. The timber is cut to the desired dimensions and either packed unfinished for a site-finished installation or finished at the factory. Depending on the desired look of the floor, the timber can be cut in three ways: flat-sawn, quarter-sawn, and rift-sawn. Solid wood flooring is milled from a single piece of timber that is kiln or air dried before sawing. It is not uncommon for homes in New England, Eastern Canada, USA, and Europe to have the original solid wood floor still in use today. Solid wood floors have a thicker wear surface and can be sanded and finished more times than an engineered wood floor. However, solid wood floors are still common and popular, but are commonly more expensive in the United States and considered higher end. With the increased use of concrete as a subfloor in some parts of the world, engineered wood flooring has gained some popularity. Solid hardwood floors were originally used for structural purposes, being installed perpendicular to the wooden support beams of a building known as joists or bearers. With its characteristic dark lines or stripes alternating with a lighter, tan-colored background, zebrawood is ideally suited for design accents in decorative veneers and hardwood floors.Solid hardwood floors are made of planks milled from a single piece of timber. For this reason, it makes a great material for wood flooring, and is also used in the manufacturing of skis and tool handles. Veneers need to be carefully handled to avoid cracking. This wood saws fairly well but because machine- and hand-planing tears at the interlocked grain, it may sometimes be difficult to obtain a clean, smooth finish. The best way to bring out the contrasting striped pattern of zebrawood is to quarter-saw it, which also minimizes the high degree of warping that can occur when the wood is seasoned. It is just over twenty-two percent harder than red oak, roughly fifteen percent harder than white oak, just under four percent softer than wenge, and about seventy-one percent that of santos mahogany’s ranking of 2200. This wood should be well-dried and equalized before use.Īs a flooring option, zebrawood is one of the harder woods. However, it is an unstable species, particularly in exceptionally dry climates, where it can be prone to shrinkage.
It is very durable, and highly resistant to termite attack. Zebrawood is considerably harder than red oak, and even northern maple. This lustrous wood has a texture ranging from medium to coarse, with a grain pattern that is usually wavy or interlocked. Zebrawood may undergo some degree of color change over time, with the light straw-toned background darkening to a richer amber color, and the brown striping turning almost black. The striping pattern can vary considerably (hence its name), and that pattern can be maximized by quarter-sawing. The sapwood of zebrawood is whitish and distinct from the heartwood, which is pale yellow-brown with narrow darker streaks. West Central Africa, mainly in Gabon and Cameroon. Microberlinia brazzavillensis Other Names and Species: For selections & prices, CALL or EMAIL US Zebrawood Wood Flooring Species Scientific Name:.
0 kommentar(er)
